Call Us Today (716) 262-8162

Energy Saving Solutions LLC

132 Nantucket Dr Cheektowaga, NY 14225

Call Us Today for your no-cost home energy assessment.

Home energy costs are always on the rise.

Where should you spend your energy dollar? Should you spend money on windows? Furnace? Insulation? How do you know?

That is why you should call us today - before you waste any of your hard earned money!

Energy Saving Solutions LLC is a full service provider of Residential Energy Measures (Heating, Cooling, Insulation, Draft Reduction, and Windows). We offer energy testing to determine how your home is uses energy.

Our Certified Energy Audits include:

  • HVAC Testing
  • Appliance Testing
  • Insulation Testing and Inspection
  • Building Leakage Testing
  • Duct Leakage Testing (extra)

WE analyze your energy consumption and model your home using our New York State approved energy software to give you recommendations on what will give you the greatest payback on your energy dollar spent.

We offer full service installation of energy reduction measures including Heating (Furnaces & Boilers), Cooling (A/C), Insulation, Windows, Building Leakage Reduction.

We will also work with your preferred contractor.


EmPower New York delivers energy saving to low-income New Yorkers. On-site energy use education provides customers with additional strategies for managing their energy costs.

Key Benefits
Cost-effective electric reduction measures such as high efficiency lighting and refrigerator replacements
Home performance strategies such as insulation and air sealing
Services are free to income-eligible households
Who is Eligible?
Participants must live in a building with 100 units or less and either participate in a utility low-income payment assistance program or have a household income at or below 60% of State Median Income (i.e., HEAP eligible).

What is the Cost
There is no cost to the customer. For renters, certain measures that directly benefit the eligible tenant are provided without a landlord contribution.

Who Provides the Services
Honeywell International was selected by NYSERDA to implement the program. The energy efficiency services are delivered by private contractors and participating Weatherization Agencies, all of whom are Building Performance Institute Accredited.

How to Apply
Referrals will be accepted from participating utilities, local Offices for the Aging and Weatherization Agencies. Energy efficiency services are prioritized based on the potential for cost-effective energy usage reduction. For additional information contact Honeywell International at 1-800-263-0960 or request an application online.


Energy Audit Process

A home energy audit is a complete, in-depth analysis of a home's energy efficiency. During this procedure, a certified professional home energy auditor will use state-of-the-art equipment to analyze how energy is being used and where energy loss is occurring. By conducting an energy audit, the auditor is able to identify ways to either stop or reduce energy loss. Minimizing or eliminating energy loss altogether could result in dramatic savings to your energy bills. Once the audit is completed, you will receive a detailed report of the results. The report will highlight any problems and include the auditor's recommendations on what action needs to be taken to improve energy efficiency. A normal home energy audit takes about 3 hours to complete.

There are 5 stages to a home energy audit:

Step 1 - Initial Interview

During this interview, the auditor collects as much background information as possible about the house. Any existing energy or ventilation problems should be discussed at this stage, as well as your concerns, goals or any plans that you may have for your home (e.g. building an extension).

Step 2 - Outdoor Inspection

The outdoor inspection examines all the exterior aspects of the house. A thorough assessment is made of the doors, windows, overhangs and skylights - if any. The outside perimeter of the home will also be taken into account. This includes looking at the building orientation and any vegetation that affects shade and windbreak.

Step 3 - Indoor Inspection

The indoor inspection is divided into the following sections:

Main Level & Basement
The examination of this area includes: thermostat, furnace, water heater, basement wall and band joist insulation, ducts for sealing and insulation, window sealing and locking and glazing, weather stripping for doors and windows, flooring, washer hoses and overall character of all appliances.

Upper Floors
The examination of this area includes: attic hatch seals, canned lighting, attic insulation/ventilation and sealing of perforations in the ceiling below the attic.

Step 4 - Blower Door and Infrared Tests

This stage consists of 2 tests, each to ascertain different areas of concern:

Blower Door Test
The blower door test entails the use of specialized diagnostic equipment to measure the air tightness of the house. It will determine where any air leaks are occurring and what the total amount of that air leakage is. This test is also used to check if there are any moisture condensation problems and to test the indoor air quality. The blower door test uses a powerful fan to depressurize the entire house and then check the rate at which air reenters the building through unsealed cracks and other openings in the building envelope.

Infrared Thermal Image Scan (NOW HERE!)
In conducting this test, the auditor uses an infrared thermograph and a special infrared camera called a Forward Looking Infrared or FLIR camera. By using wavelengths, which are invisible to the naked eye, the FLIR camera will measure temperature variations along the building's surfaces. In this way, "hot" and "cold" spots in the building envelope can be identified, allowing the auditor to form a picture of what's going on behind the walls. The scan enables the auditor to accurately pinpoint those areas where insulation and / or air sealing needs to be improved.

Step 5 - Review Results

The auditor will review the preliminary findings with you, giving you a general idea as to what improvements you can make to your home. Within one week, you'll receive a more detailed report by email. The second report will outline specific steps you can take to make your home more energy efficient. A home energy audit should cost around $300, but can vary according to the size of the home. You can receive up to a $300 rebate from Energy Saving Solutions, if you choose Energy Saving Solutions implement a recommended improvement package proposed in the audit report. Rebate is not available if you choose your own contractor. By making energy efficient improvements to your home, you can qualify for a number of tax incentives offered by the federal government.

Join Our Mailing List
For Email Newsletters you can trust

Products & Services

Energy Efficiency Program, Energy Auditor, Energy Efficiency Audit, Energy Analysis, Energy Efficiency Solutions, Energy Saving Solutions, Energy Assistance, Help with bills, National Energy Program

Get Directions

Click to select your destination

Be the first to review this business!

Review today and interact with local businesses in your area. Tell us your experiences and share them with others. It's easy!

How Can We Help?

Thank you! Your message was sent!
Please fill in all the fields.
An error occurred submitting your info.
Please try again.